Home > Products > Laser Marking Machine > Fiber Laser Marking Machine > Dynamic Fiber Laser Mark machine

Cabinet 3D Fiber Laser Marking machine
  • Cabinet 3D Fiber Laser Marking machine
  • Cabinet 3D Fiber Laser Marking machine
  • Cabinet 3D Fiber Laser Marking machine
  • Cabinet 3D Fiber Laser Marking machine
  • Cabinet 3D Fiber Laser Marking machine
  • Cabinet 3D Fiber Laser Marking machine
  • Cabinet 3D Fiber Laser Marking machine
  • Cabinet 3D Fiber Laser Marking machine

Cabinet 3D Fiber Laser Marking machine

Dynamic Fiber Laser Marking machine Applications:

1. For a variety of shapes carved, the three-axis control can be achieved freedom control of focus, undifferentiated marking in variety of steps and uneven surfaces.

2. A greater range marking. Under the premise of standard marking range, z-axis can achieve large variable focal length marking range.

3. High precision marking. The three-axis scanning system can arbitrarily adjust the focus of the traditional fixed-focus laser marking machine, eliminate the range deformation and spot deviations from the characteristics of traditional F lens.

4. More suitable for deep engraving. The dynamic marking is able to automatically adjust the focus in the process of engraving, deeper marking depth through marking on the machined surface with continuously highest energy density.

  • Description
  • Parameters
  • Equipment photos

Dynamic Fiber Laser Marking machine Introductions:

The enclosed cabinet 3D Dynamic fiber Laser Marking machine can be carved both on metal materials and some non-metallic materials. This machine has a sealed structure. During work, fog will be kept in the enclosed laser cabinet without emission to outside. Environmental, friendly and healthy, this design is special for European market or other markets which have high demands for working environment. 

The 3D Dynamic Fiber laser Marking machine adopts 3D Galvanometer scanner which has compact design, high positioning accuracy, higher marking speed, and strong anti-interference ability. In the process of dynamic marking, the marking line has high precision, distortion free, power uniform, pattern without distortion. The control software adopt advanced Newton interpolation correction algorithm and dynamic light compensation point by point tracking algorithm, embedded marking control board can realize to work offline, and convenient for batch processing. The whole system is specialized for the small focal spot, large scan field and high flexibility of laser scanning applications.


3D laser marking machine using the front focus technology, dynamic focus, so that after the focus of the spot closer, faster, better results for a wide range of multi-level marking. 3D laser marking machine can work on sculptured surface without defocus.

Dynamic Fiber Laser Marking machine Features:

1. 3D Dynamic Fiber Laser Marking machine with advanced small focal spot design, the min focal spot is 30um.

2. Dynamic Fiber Laser Marking machine is with accurate optical path design and fabrication, low energy decrement for large scan field and curved surface processing.

3. Machine scan field up to 400x400mm, meet large scan field engraving requirements. Can be marked on multi-level large format,on the three-dimensional surface, on the plane, according to the need to configure various types of lasers. 

4. Dynamic Fiber Laser Marking machine is with high speed system, meets above 4000mm/s marking speed.

5. 3D Fiber Laser marking machine maximum marking height up to 280mm, far exceed the industry height standard of 80mm.

6. The focal axis position is optimized for deep engraving, suitable for embossment, 3D applications. Deep Marking with high accuracy.

7. Marking software with 3D operation interface, operate 3D upper and lower, right and left, front and back view, set base level, front and back switch, 3D coordinate axis simulating marking content, model frame function to help the operator place the work piece and edit marking graphics.

8. Precisely control the focal length position of marking machine, automatically adjust Z-axis for 3D marking process, keep the spot size to minimum, and ensure the uniform graphic effect after marking on the object.

9.  Built-in concave and convex circular tube, concave and convex sphere, slope, cone, polygon, etc. basic models, the operator can easily and rapidly set the marking.

10.  3D models can be imported, 2D graphics can be directly cladded or projected onto built-in curve surface.

11. The whole system adopted the optimization designing of electromagnetic compatibility, with high. signal-to-noise ratio and strong anti-interference ability.

12. 3D laser marking machine Software control system can automatically calculate the arc radian, automatically adjust the focal length. 

13. 3D laser marking machine with friendly operation interface, it is suit for many file formats, such as dxf, plt, cnc, step, iges, etc.


Dynamic Fiber Laser Marking machine Parameters:

Laser Source 

Imported Fiber laser 



Output Power 




Maximum flat marking area 

400mm*400mm / 700mm*700mm 

Maximum curved marking area 

400mm*400mm / 700mm*700mm 

Beam quality M2 


Pulse Repeatable Frequency 


Cooling Method 

Air cooling 

Marking way 

XYZ Triaxial dynamic focusing 

Focusing range 


highest machining speed

350 character/s 

Repeat marking accuracy 


Operating Ambient Temperature 

Temperature:10℃~35℃ Humidity:5%~75% 

Power Demand 

Single phase AC110V/220V 10A 

Dynamic Fiber Laser Marking machine

Cabinet 3D Fiber Laser Marking machine

Copyright © Jinan Lansen Laser Equipment Co., Ltd. All Rights Reserved | Sitemap |Powered by