Desktop Fiber Laser Marking Machine Features:
1.Best Marking Effect: the laser beam of fiber laser etching machine for metal is fine and thin. Laser etching steel can provide the best marking effect among all the laser machines. Especially good at smallest character marking, such as mark on IC chip.
2.Deep Marking: Lansen Fiber Laser Marking machine can make deep marking up to 1.0mm on stainless steel and aluminum. While YAG and Diode marking only could mark 0.2mm-0.3mm.
3.Higher Accuracy: The Fiber Laser marking machine for metal can reach unto 0.001mm precision, while diode only 0.01mm.
4.10 Years Long lifetime: fiber laser marking machine use the fiber laser source made by Germany IPG technology or Chinese JPT, Raycus high quality fiber laser, the lifetime can reach 20000-100,000 hours, so the machine can be used for 5-10 years.
5. No consumables:The laser etching machine for metal can be used for metal marking for 5-10 years without any consumables.
6.No need to adjust the laser path.
7.Free of Maintenance.
8.Use Integrated Air Cooling.
9.Low Power Consumption: low cost, only 0.5kw/hour.
10. Small and compact: the volume of Lansen Laser’s fiber laser marking machine is small, only 0.15 M3.
Metal Fiber Laser Marking machine Aplicable Industries:
1. Electrical Engineering and Electrical part and component
2. Mobile (Cover, battery, keyboard, IPhone Case)
3. Jewelry(Ring, pedeant, bracelet),eyeglass,clocks and craft
4. Building materials,PVC pipe
5. Car motor car spare part, Instrument and meters and cutting tool
6. plastic case,aviation and aerospace,
7. military product,hardware fitting and accessory,sanitary appliance
8. food and beverage ,Medicine package and medical instrument,solar Pv industry
Desktop Fiber Laser Marking Machine Parameters:
Laser Source | Fiber Laser |
Output Power | 20W/30w/50w/ 100w |
Wavelength | 1060nm |
Beam Quality | <2 |
Repeat Frequency | 10khz--- 100khz |
Pulse Energy | 2mJ |
Beam Divergence | -0.3 to +0.3mrad |
Laser Class | IV |
Resolution | 18μ |
Repeatablility | 50μ |
Marking Scope | 110x 110mm/ 200x 200mm(optional)/300*300mm(optional) |
Linear Speed | 800 character/ s |
Marking Linear Speed | ≤12,000mm/s |
Marking Depth | Max. 1.0- 1.5mm (hard steel) |
Min. Line Width | 0.012mm |
Min. Character Size | 0.15mm |
Repeat Accuracy | ±0.003mm |
Input Power | 0.5kw |
Electrical Source | 220V / Single-Phase Circuit / 50/60Hz /4A 110V/60Hz |
Desktop Fiber Laser Marking machineDesktop Fiber Laser Marking Machine photos: