Combined Portable Mini Fiber Laser Marking Machine Features:
1.Best Marking Effect: the laser beam of 20w 30w 60W Fiber Laser is fine and thin. It can provide the best marking effect among all the laser machines. Especially good at smallest character marking, such as mark on IC chip.
2.Deep Marking: fiber laser can make deep marking up to 1.0mm on stainless steel and aluminum. While YAG and Diode marking only could mark 0.2mm-0.3mm.
3.Higher Accuracy: fiber laser can reach unto 0.001mm precision, while diode only 0.01mm.
4.Long lifetime: The fiber laser module lifetime can reach 20,000-100,000 hours, enable 5-10 years using of the machine.
5. No consumables: Fiiber laser marking system can be used for 5-10 years without any consumables.
6.No need to adjust the laser path.
7.Free of Maintenance.
8.Use Integrated air cooling.
9.Low Power Consumption: low cost, only 0.5kw/hour.
10. Small and compact: the volume of Combined Mini fiber laser marking machine is small, only 0.15 M3.
Applicable Industries:
1. Electrical Engineering and Electrical part and component
2. Mobile (Cover, battery, keyboard, IPhone Case)
3. Jewelry(Ring, pedeant, bracelet),eyeglass,clocks and craft
4. Building materials,PVC pipe
5. Car motor car spare part, Instrument and meters and cutting tool
6. plastic case,aviation and aerospace,
7. military product,hardware fitting and accessory,sanitary appliance
8. food and beverage ,Medicine package and medical instrument,solar Pv industry
Applicable Materials:
Many type of metals: Gold,Silver,Stainless Steel,Copper,Aluminum,chrome Brass,etc
Alloy and metal oxides: Anodized Aluminum
Some non-metallic materials & Special surface treatment:silicon wafer, Poly urethane, ceramics, plastic, rubber, epoxy resin, PVC, PC, ABS, Coating film etc.
Combined Portable Mini Fiber Laser Marking machine Parameters:
Laser Source | Fiber Laser |
Output Power | 20W/30W/50W/60W |
Wavelength | 1060nm |
Beam Quality | <2 |
Repeat Frequency | 10khz--- 100khz |
Pulse Energy | 2mJ |
Beam Divergence | -0.3 to +0.3mrad |
Laser Class | IV |
Resolution | 18μ |
Repeatablility | 50μ |
Marking Scope | 110x 110mm/ 200x 200mm(optional)/300*300mm(optional) |
Linear Speed | 800 character/ s |
Marking Linear Speed | ≤12,000mm/s |
Marking Depth | Max. 1.0- 1.5mm (hard steel) |
Min. Line Width | 0.012mm |
Min. Character Size | 0.15mm |
Repeat Accuracy | ±0.003mm |
Input Power | 0.5kw |
Electrical Source | 220V / Single-Phase Circuit / 50/60Hz /4A 110V/60Hz |
Combined Mini Fiber Laser Marking Machine