LP-M1530F Fiber Laser Cutting machine
Professional used to cut thin sheet metal, in a variety of high quality 0.5-12 mm carbon steel sheet cutting, also cut stainless steel plate, aluminum alloy plate, galvanized sheet, electrolytic plate, silicon steel, titanium alloy, aluminum zinc plate and other metal materials.
LP-M1530F Fiber Laser Cutting machine
Unit | 750W/1000W | |
Operational mode | CW,QCW | |
Wavelength of the center radiation | nm | 1070-1080 |
Standard power output | W | 500 |
Optical quality | Mm*mrad | 4 |
SPD speed | kHz | 5 |
Optical fiber diameter | μm | ≥50 |
Output power stability (long-term) | % | ±2 |
Power supply | VAC | 400-460 |
Power consumption (including supporting annex) | kW | 33 |
750W Fiber Laser Cutting machine Main Parameters:
LP-M1530F | |
Work size | 1500*3000mm |
Laser type | Fiber laser |
Laser working medium | Fiber |
Laser wavelength | 1070 nm |
Rated output power | 750 W/1000W |
Beam quality | <0.373mrad |
Table axial positioning accuracy | ≤±0.02mm/m |
Repeat positioning accuracy table | ≤±0.02mm/m |
Cutting speed | ≤20m/min |
XYZ Driving mode | Imported servo motor |
Transmission mode | Ballscrew |
Power Ratings | Three-phase AC 380V 50Hz |
Equipment Weight | 1800Kgs |
LP-M1530F Fiber Laser Cutting machine Features:
1. It adopts advanced branded optical fiber laser core technology,good optical mode,stable performance.
2. High efficiency of photoelectric conversion,twice of domestic laser source.
3. Low heat of laser source,only needing 5P water cooling machine,saving electricity.
4. The gantry flying light path design,light operation,saving about 40% electricity than competitors.
5. Achieve a perfect cutting effect by only blowing compressed air during processing,which can largely reduce costs of auxiliary
gas such as Oxygen.Nitrogen about thousand dollars,
6. Equipped with centralized lubrication system to make the machine run more stable.
7. Axial positioning accuracy of workbench: ≤±0.03mm/m
8. Repetitive positioning accuracy of workbench: ≤±0.03mm/m